Baidurya Bhattacharya

 

Professor

Dept. of Civil Engineering

IIT Kharagpur

Profile on ResearchGate

Profile on Google Scholar

Note to publishers:  These articles have been put on my website solely for fair use by the academic community.  However, if you believe that your copyright has been violated by the presence of my pdf articles on this website, please let me know immediately and your concern will be addressed

 

PUBLICATIONS

 

Journal articles on Computational Materials Science

 

Journal articles on Probabilistic Mechanics


2018

 

Patra, P. and Bhattacharya, B. “Zeroth Law investigation on the logarithmic thermostatScientific Reports, volume 8, Article number: 11670 (2018).

2017

 

Prasad, MVD and Bhattacharya, B. “Phononic origins of friction in carbon nanotube oscillators,” Nano Letters, ACS. doi: 10.1021/acs.nanolett.6b04310 2017

2016

 

Patra, P. and Bhattacharya, B. “Equilibrium free energy differences at different temperatures from a single set of nonequilibrium transitionsPhysical Review E, APS,  94(4), 040101(R), 2016.

 

Chandra, A., Patra, P and Bhattacharya, B.  “Thermomechanical Buckling of Boron Nitride Nanotubes using Molecular DynamicsMaterials Research Express, IOP. , vol. 3, no. 2, 2016.

 

Prasad, MVD and Bhattacharya, B. “Phonon scattering dynamics of thermophoretic motion in carbon nanotube oscillatorsNano Letters, 16 (4), pp 2174–2180. 2016.

 

Patra, P. and Bhattacharya, B. “Heat pump without particle transport or external work on the medium achieved by differential thermostatting of the phase spacePhysical Review E, vol. 93, no. 3. 2016.

 


2015

 

Chandra, A., Patra, P and Bhattacharya, B. “Thermal vibration characteristics of armchair Boron-Nitride NanotubesJournal of Applied Physics, AIP, 118, 234503, 2015.

 

Prasad, MVD and Bhattacharya, B. “Phonon wave-packet scattering and energy dissipation dynamics in carbon nanotube oscillatorsJournal of Applied Physics, AIP, 118, 244906, 2015.

 

Patra, P., Melendez, M. and Bhattacharya, B., “Approximating the entire spectrum of nonequilibrium steady-state distributions using relative entropy: An application to thermal conductionPhysical Review E, vol. 92, 023304, 2015

 

Prasad, MVD and Bhattacharya,B. “Buckling and post buckling characteristics of cantilevered singlewalled carbon nanotubes in bending  International Journal of Nanoscience, World Scientific, 14, 1550019 (2015).

 

Patra, P. and Bhattacharya, B. “An ergodic configurational thermostat using selective control of higher order temperatures, “ Journal of Chemical Physics, AIP, vol. 142, 194103,2015

 

Paul, A., Bhattacharya, B. and Bhattacharyya, T.K. “Selective detection of Hg (II) over Cd(II) and Pb(II) ions by DNA functionalized CNT network, ” IEEE Sensors Journal, vol.15, no.5, pp.2774,2779, May 2015

 

Paul, A., Bhattacharya, B. and Bhattacharyya, T.K. "Electric-field assisted desorption of water molecules in DNA functionalized CNT network"  IEEE Sensors Journal, vol. 15, no. 5, 2947-2950, May 2015.


2014

Patra, P. and Bhattacharya, B. “Non-Ergodicity of Nose-Hoover chain thermostat in computationally achievable timePhysical Review E, 90, 043304, 2014

 

Patra, P. and Bhattacharya, B. “A deterministic thermostat for controlling temperature using all degrees of freedomJournal of Chemical Physics, AIP, vol. 140, 064106, 2014.

 

Paul, A., Bhattacharya, B. and Bhattacharyya, T.K. “Fabrication and Performance of solution based micro-patterned DNA functionalized carbon nanotube network as humidity sensorsIEEE Trans. Nanotechnology, vol. 13, no. 2, pp. 335-342, 2014.

 

Pal, A., Agarwala, A., Raha, S. and Bhattacharya, B. “Performance metrics in a hybrid MPI-OpenMP based molecular dynamics simulation of nanoindentationJournal of Parallel and Distributed Computing, Elsevier, vol. 74, no. 3, pp. 2203-2214, 2014


2013

Paul, A; Pramanick, B; Bhattacharya, B and Bhattacharyya, T.K.  “Deoxyribonucleic acid functionalized carbon nanotube network as humidity sensorsIEEE Sensors Journal, vol. 13, no. 5, pp. 1806-1816, 2013.


2012

Rajak, P., Ghosh, S., Bhattacharya, B. and Chakraborti, N. “Pareto-optimal Analysis of Zn-coated Fe in the Presence of Dislocations Using Genetic AlgorithmsComputational Materials Science, Elsevier, vol. 62, pp. 266-271, 2012


2011

Rajak, P., Tewary, U., Das, S., Bhattacharya, B. and Chakraborti, N. “Phases in the Zn-coated Fe Analyzed through an Evolutionary Meta-model and Multi-objective Genetic Algorithms,” Computational Materials Science, vol. 50, no. 8, pp. 2502-2516. 2011.

 

Prasad, MVD and Bhattacharya, B. “Molecular dynamics simulations of carbon nanotube-based oscillators having topological defectsInternational Journal of Nanoscience,World Scientific, vol. 10, no. 1, pp. 1-5. 2011.


2010

Paul, A. and Bhattacharya, B. “DNA- functionalized carbon nanotubes for non-biological applicationsMaterials and Manufacturing Processes, Taylor and Francis, vol 25, pp 891-908, 2010.


2009

Bhattacharya, B., Dinesh Kumar, G.R. , Agarwal, A., Erkoη, Ş., Singh, A. and Chakraborti, N.  “Analyzing Fe-Zn system Using Molecular Dynamics, Evolutionary Neural Nets and Multi-objective Genetic Algorithms,” Computational Materials Science, Elsevier, vol. 46, no. 4, pp 821-827, 2009.

 

Sreevathsan, R., Bhattacharya, B., Dinesh Kumar, G.R.,  Chakraborti, N. “Multi-objective Materials Design by Genetic Algorithms – Generalized for B1 and B2 Ionic Structures,” Journal of Computational and Theoretical Nanoscience, American Scientific Publishers, vol. 6, no. 4, pp. 849-856, 2009

 

Sreevathsan, R., Bhattacharya, B. and Chakraborti, N. “Designing Ionic Materials through Multi-Objective Genetic Algorithms,” Materials and Manufacturing Processes, Taylor and Francis, vol. 24, no. 2, pp. 162-168, 2009

 

Chakraborti, N., Sreevathsan, R., Ravichandran, J. and Bhattacharya, B.  “Tailor-made material design: An evolutionary approach using multi-objective genetic algorithmsComputational Materials Science, Elsevier, vol. 45, pp 1 – 7, 2009


2006

Bhattacharya, B. and Lu, Q. “The asymptotic properties of random strength and compliance of single-walled carbon nanotubes using atomistic simulationJournal of Statistical Mechanics: Theory and Experiment, Institute of Physics, paper no. P06021, June 2006.

 

Lu, Q. andBhattacharya, B. “Fracture resistance of zigzag single walled carbon nanotubesNanotechnology, Institute of Physics, vol. 17, pp. 1323 – 1332, 2006.


2005

Lu, Q. and Bhattacharya, B. “Effect of randomly occurring Stone-Wales defects on mechanical properties of carbon nanotubes using atomistic simulationNanotechnology, Institute of Physics, vol. 16, pp. 555 – 566, 2005.

 

Lu, Q. and Bhattacharya, B.  “The Role of Atomistic Simulations in Probing the Small-Scale Aspects of Fracture - A Case Study on a Single-Walled Carbon NanotubeEngineering Fracture Mechanics, Elsevier, vol. 72, no. 13, pp 2037-2071, 2005.


2000 and earlier

 

Bhattacharya, B. and Ellingwood, B. R. "A new CDM-based approach to structural deterioration", International Journal of Solids and Structures, Elsevier, vol. 36, no 12, pp. 1757-1779, 1999.

 

 

Bhattacharya, B. and Ellingwood, B. "Continuum damage mechanics-based model of stochastic damage growth", Journal of Engineering Mechanics, ASCE, vol. 124, no. 9, pp. 1000-1009, September, 1998.

 

Bhattacharya, B. and Ellingwood, B. R. "A CDM analysis of stochastic ductile damage growth and reliability", Probabilistic Engineering Mechanics, Elsevier, vol 14, no 1-2, pp 45-54, 1998.

 

Bhattacharya, B. and Ellingwood, B. R. "Continuum damage mechanics analysis of fatigue crack initiation", International Journal of Fatigue, vol. 20, no 9, pp. 631-639, 1998.

 


 

 


2017

 

Sen, S. and Bhattacharya, B. “Non-Gaussian parameter estimation using generalized polynomial chaos expansion with extended Kalman filtering,” Structural Safety, Elsevier. In press.

2016

 

Sen, S. and Bhattacharya, B. “Online structural damage identification technique using constrained dual extended Kalman filterStructural Control and Health Monitoring, Wiley, Nov 2016. DOI: 10.1002/stc.1961. 2016.

 

Sen, S. and Bhattacharya, B. “Progressive damage identification using dual extended Kalman filterActa Mechanica, Springer, DOI 10.1007/s00707-016-1590-9. 2016.

 

Sen, S. and Bhattahcharya, B. “A non iterative structural damage identification methodology using eigenstructure assignment in state spaceStructure and Infrastructure Engineering, Taylor and Francis, DOI 10.1080/15732479.2016.1157825. 2016.

 


2015

 

Sen, S. and Bhattahcharya, B. "Non-iterative eigenstructure assignment technique for finite element model updating," Journal of Civil Structural Health Monitoring, Springer, vol. 5, no. 4, pp. 365-375, 2015.

 

Sen, D and Bhattacharya, B. “On the Pareto optimality of variance reduction simulation techniques in structural reliabilityStructural Safety, Elsevier, vol. 53, pp. 57-74, 2015.


2013

Bhattacharya, B., Chatterjee, A.,  Agrawal, G., and Mondal, A. “Reliability-based partial safety factors for dual performance level design of prestressed inner containment shells in Indian nuclear power plantsNuclear Engineering and Design, Elsevier, vol. 256, pp. 188-201, 2013

 

Sharma, G., Agarwala, A., and Bhattacharya, B. “A Fast Parallel Gauss Jordan Algorithm for Matrix Inversion using CUDA” Computers & Structures, Elsevier, vol. 128, pp 31-37, 2013.

 


2011

Agrawal, G. and Bhattacharya, B. “Effect of relative failure consequences in reliability based dual performance designCanadian Journal of Civil Engineering, Canadian Society of Civil Engineering vol 38, no 11, pp 1216-1226, 2011

 

Vhanmane, S. and Bhattacharya, B. “Ultimate strength analysis of ship hull girder under random material and geometric propertiesJournal of Offshore Mechanics and Arctic Engineering, ASME, vol. 133, no. 3. 2011.

 

Patra, P. and Bhattacharya, B. “An assessment of IS codal provisions for the design of low rise steel moment frames through incremental dynamic analysisBulletin of Earthquake Engineering, Springer, vol. 9, no. 2, pp. 581-. 2011.


2010

Agrawal, G. and Bhattacharya, B. “Optimized partial safety factors for the reliability based design of rectangular prestressed concrete beamsJournal of Structural Engineering, SERC Chennai , vol 37, no. 4, pp 263-273. 2010.


2009

Bhattacharya, B., Lu, Q., and Zhong, J. “Reliability of Redundant Ductile Structures with Uncertain System Failure Criteria: a Study on a Highway Steel Girder BridgeSadhana, Indian Academy of Sciences, vol. 34, no. 6, pp 903 – 921, 2009


2008

Vhanmane, S. and Bhattacharya, B. “Estimation of Ultimate Hull Girder Strength with Initial ImperfectionsShip and Offshore Structures, Taylor and Francis vol 3, no 3, pp. 149-158, 2008

 

Bhattacharya, B., Li, D. and Chajes, M. J. “Bridge rating using in-service data in the presence of strength deterioration and correlation in load processStructure and  Infrastructure Engineering, Taylor and Francis, vol. 4, no. 3 pages 237 – 249, 2008

 

Bhattacharya, B. “The Extremal Index and the Maximum of a Dependent Stationary Pulse Load Process Observed above a High ThresholdStructural Safety, vol. 30, no. 1, pp. 34 – 48, 2008


2007

Zhong, J.  and Bhattacharya, B. “A system reliability based design equation for steel girder highway bridgesJournal of Structural Engineering, SERC, India, vol. 34, No. 4, pp. 284–290, 2007

 

Vhanmane, S. and Bhattacharya, B. “On improved analytical method for stress-strain relationship for plate elements under axial compressive loadShip and Offshore Structures, Taylor and Francis vol 2, no 4, pp. 347-353, 2007

 

Guzda, M., Bhattacharya, B. and Mertz, D. “Live Load Distribution on Highway Bridges using In-service Bridge Monitoring SystemJournal of Bridge Engineeirng, ASCE, vol 12, no 1, pp. 130-134, 2007.


2005

Bhattacharya, B., Li, D., Chajes, M. J. and Hastings, J.  “Reliability-based load and resistance factor rating using in-service data”, Journal of Bridge Engineering, ASCE, vol. 10, no. 5, pp. 530-543, 2005

 

Bhattacharya, B., Li., D. and Chajes, M. J. “Load and Resistance Factor Rating Using Site Specific DataTransportation Research Record: Journal of the Transportation Research Board,CD 11-S, Transportation Research Board of the National Academies, Washington, D.C., pp. 143–151, 2005.

 

Bhattacharya, B., Basu, R. and Srinivasan, S. "A Probabilistic model of flooding loads on transverse watertight bulkheads in the event of hull damage", Journal of Ship Research, SNAME, vol. 49, no. 1, pp. 12 – 23, 2005.

 


2001

Bhattacharya, B., Basu, R. and Ma, K-t. "Developing target reliability for novel structures: the case of the Mobile Offshore Base", Marine Structures, Elsevier, vol. 14, no. 1 – 2, pp. 37-58, 2001.

 


 

 

 

 

 

 

 

 

 

 

 

 

Back to Bhattacharya Homepage

Description: Description: Description: Description: myspace visitor tracker