Baidurya Bhattacharya

 

Professor

Dept. of Civil Engineering

IIT Kharagpur

Profile on ResearchGate

Profile on Google Scholar

Note to publishers:  These articles have been put on my website solely for fair use by the academic community.  However, if you believe that your copyright has been violated by the presence of my pdf articles on this website, please let me know immediately and your concern will be addressed

 

 

 

PUBLICATIONS (contd.)

 

 

Conference publications on Computational Materials Science

 

Patra, P. and Bhattacharya, B. “Equilibrium free energy differences at different temperatures from a single set of nonequilibrium transitions,” Non-equlibrium Simulation Conference NESC16, Sheffield, UK, July 2016.

 

Patra, P. and Bhattacharya, B. “Ergodicity and linear response of thermostats for single degree of freedom systems: towards improved temperature control,” ASCE Engineering Mechanics (EMI 2016) and Probabilistic Mechanics and Reliability Conference (PMC 2016), Nashville, May 2016.

 

Chandra, A., Patra, P. and Bhattacharya, B.  “Effect of precompression on thermal vibration characteristics of Boron-Nitride Nanotubes,” International Conference on Advances in Dynamics and Control, Durgapur, February 2016.

 

Patra, PK and Bhattacharya, B. “Advantages of a deterministic thermostat utilizing the entire phase space over other thermostatting techniques,” Sixth International Conference on Theoretical, Applied, Computational and Experimental Mechanics, Kharagpur, India, December 2014

 

Patra, PK and Bhattacharya, B. “Non-Ergodicity of Nosé-Hoover Chain Dynamics,” Sixth International Conference on Theoretical, Applied, Computational and Experimental Mechanics, Kharagpur, India, December 2014

 

Prasad, MVD and Bhattacharya, B. “Carbon nanotube oscillators: Effect of small bending strain,” Sixth International Conference on Theoretical, Applied, Computational and Experimental Mechanics, Kharagpur, India, December 2014

 

Prasad, MVD and Bhattacharya, B. “Energy dissipation and phononic friction in carbon nanotube oscillators,Sixth International Conference on Theoretical, Applied, Computational and Experimental Mechanics, Kharagpur, India, December 2014

 

Pal, A., Kanungo, B., Bhattacharya, B. “Interfacial properties in amine functionalized carbon nanotubes in epoxy composite through ab initio and molecular dynamics simulations,” 22nd International Workshop on Computational Mechanics of Materials, Baltimore, MD, September 2012

 

Pal, A., Kanungo, B., Karnati, S., and Bhattacharya, B. “Interfacial strength in amine functionalized carbon nanotubes in epoxy composite through ab initio and molecular dynamics simulations,” 11th ASCE Joint Specialty Conference on Probabilistic Mechanics and Structural Reliability, Notre Dame, IN, June 2012

 

Bhattacharya, B., Rajak, P., Tewary, U., Das, S., Chakraborti, N.  “Multi-Objective Optimization of Energy Absorption and Shear Deformation Properties of Zinc-Coated Iron,” 6th MIT Conference on Computational Fluid and Solid Mechanics, Boston, June 2011

 

Bhattacharya, B., Rajak, P., Tewary, U., Das, S. and Chakraborti, N. “Optimal Properties of Zn-coated Fe combining Molecular Dynamics, Evolutionary Meta-model and Multi-objective Genetic Algorithms.” XVIII Conference Computer Methods in Materials Technology, Zakopane, Poland, January 2011

 

Prasad, MVD and Bhattacharya, B. “Bending Properties of Carbon Nanotubes with Multiple Vacancy Defects using Atomistic Simulations,” 2nd International 23rd AIMTDR Conference, IIT Madras, Dec 2008.

 

Sreevathsan, R., Bhattacharya, B. and Chakraborty, N. “Design of ionic materials through multiobjective genetic algorithm,” Neural Networks and Genetic Algorithm in Materials Science, Kolkata, India, January 8-10, 2008

 

Baidurya Bhattacharya and Qiang Lu, “The asymptotic properties of strength and compliance of single-walled carbon nanotubes containing random defects ,” 10th International Conference on Applications of Statistics and Probability in Civil Engineering (ICASP10), Tokyo, Japan, August 2007

 

Q. Lu and B. Bhattacharya. “Fracture resistance of single-walled carbon nanotubes through atomistic simulation,”9th International Conference on Structural Safety and Reliability, Rome, Italy, June 2005

 

B. Bhattacharya and Q. Lu “The asymptotic distribution of ultimate strength of single-walled carbon nanotubes using atomistic simulation,” Symposium on Stochastic Fatigue Fracture and Damage Mechanics, 9th International Conference on Structural Safety and Reliability, Rome, Italy, June 2005

 

Lu, Q. and Bhattacharya, B.  Analysis of Randomness in Mechanical Properties of Carbon Nanotubes through Atomistic Simulation,” 46th AIAA/ ASME/ ASCE/ AHS/ ASC Structures, Structural Dynamics & Materials Conference, Austin, TX, April 2005

 

Lu, Q. and Bhattacharya, B.  “Atomistic Simulation of Stochastic Aspects of Fracture in Carbon Nanotubes” at the 2004 ASME International Mechanical Engineering Congress, Anaheim, CA, Nov 2004

 

Bhattacharya, B. and Lu, Q. “Atomistic simulation for studying the asymptotic behavior of ultimate strength of carbon nanotubes with randomly occurring defects,” 9th ASCE Joint Specialty Conference on Probabilistic Mechanics and Structural Reliability, Albuquerque, NM, USA, July 2004.

 

Lu, Q. and Bhattacharya, B. “A study of randomness in fracture of carbon nanotubes using atomistic simulation”, 17th ASCE Engineering Mechanics Conference, Newark, DE, June 2004

 

Lu, Q. and Bhattacharya, B.  “A study of randomness in fracture using atomistic simulation” at the Symposium on Durability and Damage Tolerance of Heterogeneous Materials at the 2003 ASME International Mechanical Engineering Congress, Washington, DC, Nov 2003

 

Lu, Q. and Bhattacharya, B.  “Recent Advances in Atomistic Simulations of Fracture: A Review”, International Workshop and Conference on Construction Management and Materials , Kharagpur, India. January, 2003

 

Lu, Q. and Bhattacharya, B.  “A Review of Recent Advances in Atomistic Simulations of Fracture” Structures Congress, Seattle, WA, May-June 2003

 

Bhattacharya, B. “Asymptotic independence of material failure at different scales – the role of small-scale fluctuations”, 15th ASCE Engineering Mechanics Conference, New York, June 2002

 

Bhattacharya, B. “Random Fluctuations in Material Micro-structure: The Need for Space-Time Modeling”, International Conference on the Advances in Civil Engineering, Kharagpur, India, January 2002

 

Ellingwood, B. R. and Bhattacharya, B. "Damage mechanics-based assessment of time-dependent structural deterioration and reliability", 26th Water Reactor Safety Information Meeting, Washington, DC, October 1998

 

Bhattacharya, B. and Ellingwood, B. R. "CDM analysis of fatigue crack initiation under random loading", Fourth International Conference on Stochastic Structural Dynamics, Notre Dame, Indiana, August 1998.

 

Bhattacharya, B. and Ellingwood, B. R. "Stochastic fatigue crack initiation based on continuum damage mechanics", International Conference on Structural Safety and Reliability, Kyoto, Japan , November 1997

 

Bhattacharya, B. and Ellingwood, B. R. "A CDM-based Approach to Stochastic Damage Growth", 7th ASCE Specialty Conference on Probabilistic Mechanics, Worcester, Aug., 1996.

 

Bhattacharya, B. and Ellingwood, B. R. "A Damage Mechanics-based Approach to Structural Deterioration", 11th ASCE Engineering Mechanics Conference, Fort Lauderdale, May, 1996.

 

Conference publications on Probabilistic Mechanics

 

Sen, S. and Bhattacharya, B. “Adaptive nonlinear Kalman filtering technique for parameter identification: an application to Bouc-Wen model,” ASCE EMI Conference on Mechanics for Civil Engineers Against Natural Hazards, EMI 2015, HongKong, January 2015

 

Sen, S. and Bhattacharya, B. “Non-iterative eigenstructure assignment based finite element model updating of a Mindlin–Reissner plate in Duncan form of state space using ambient vibration response,” Sixth International Conference on Theoretical, Applied, Computational and Experimental Mechanics, Kharagpur, India, December 2014

 

Sen, S., Radhika, B. and Bhattacharya, B. “Identification of Bouc-Wen model parameters using Extended Kalman filter with adaptive process and measurement covariance matrices,” Sixth International Conference on Theoretical, Applied, Computational and Experimental Mechanics, Kharagpur, India, December 2014

 

Sen, D., Bhattacharya, B., Manohar, C.S. “Reliability of bridge deck subject to random vehicular and seismic loads through subset simulations,” International Conference on Bridge Maintenance, Safety and Management, Lake Como, Italy, July 2012.

 

Sen, D. and Bhattacharya, B. “On the Pareto optimality of efficient simulation techniques in structural reliability,” 11th ASCE Joint Specialty Conference on Probabilistic Mechanics and Structural Reliability, Notre Dame, IN, June 2012

 

Vhanmane, SC and Bhattacharya, B. “Probabilistic modeling of ship corrosion based on incomplete in-situ data,” 11th ASCE Joint Specialty Conference on Probabilistic Mechanics and Structural Reliability, Notre Dame, IN, June 2012

 

Bhattacharya, B. “Disaster mitigation of large infrastructure systems,” Proceedings of the International Symposium on Engineering under Uncertainty: Safety Assessment and Management (ISEUSAM 2012),Springer, Shibpur, India, January 2012.

 

Bhattacharya, B., Agrawal, G., Chatterjee, A.  and Mondal, A. “Development of partial safety factors for the design of prestressed inner containment shells in Indian NPPs,” 21st Conference on Structural Mechanics in Reactor Technology, New Delhi, November 2011

 

Chatterjee, A., Agrawal, G., Mondal, A. and Bhattacharya, B. “Development of partial safety factors for the design of partially prestressed rectangular sections in biaxial flexure,” 4th Conference on Nuclear Reactor Technology, Mumbai, March 2011.

 

Vhanmane, S. and Bhattacharya, B. “Ultimate strength of ship hull girder under random initial imperfections,” 10th International Conference on Structural Safety and Reliability (ICOSSAR), Osaka, Japan, September 2009

 

Bhattacharya, B., Chajes, M. and Li, D. “Reliability-based optimized rating equation of deteriorating bridges using loading and corrosion data,” 10th International Conference on Structural Safety and Reliability (ICOSSAR), Osaka, Japan, September 2009

 

Vhanmane, S. and Bhattacharya, B. “Ultimate strength analysis of ship hull girder under random material and geometric properties,” 28th Int'l Offshore Mechanics and Arctic Engineering Conference (OMAE), Honolulu, USA, May 2009

 

Baidurya Bhattacharya, “The Extremal Index of a Dependent Stationary Pulse Load Process,” 10th International Conference on Applications of Statistics and Probability in Civil Engineering (ICASP10), Tokyo, Japan, August 2007

 

Michelle T. Bensi and Baidurya Bhattacharya, “Probability-based vulnerability and criticality assessment of a highway bridge subjected to terrorist attack,” 10th International Conference on Applications of Statistics and Probability in Civil Engineering (ICASP10), Tokyo, Japan, August 2007

 

H. Suzuki, H. R. Riggs, M. Fujikubo, T. A. Shugar, H. Seto, Y. Yasuzawa, B. Bhattacharya, D. A. Hudson, H. Shin, “Very large floating structures,” Proceedings of the 26th International Conference on Offshore Mechanics and Arctic Engineering , June 2007, San Diego, USA.

 

B. Bhattacharya. “Reliability-based bridge rating using in-service loading data in the presence of corrosion deterioration,” Civil Engineering in the New Millenium, Bengal Engineering and Science University, Shibpur, January 2007

 

Bensi, M., Bhattacharya, B. and Chajes, M. “Evaluating Risk of Terrorist Attack on a Cable Stayed Bridge: A Probabilistic Structural Analysis based Approach,” First International Conference on Safety and Security Engineering, Rome, Italy, June 2005

 

Bhattacharya, B.  “Reliability of Nuclear Power Plant Piping Components Under Creep and Corrosion Damages” at the 2004 ASME International Mechanical Engineering Congress, Anaheim, CA, Nov 2004

 

Lu, Q. and Bhattacharya, B.  “Atomistic Simulation of Stochastic Aspects of Fracture in Carbon Nanotubes” at the 2004 ASME International Mechanical Engineering Congress, Anaheim, CA, Nov 2004

 

Srinivasan, S. and Bhattacharya, B. “Probabilistic failure prediction of filament-wound glass-fiber reinforced composite tubes under biaxial loading,” 9th ASCE Joint Specialty Conference on Probabilistic Mechanics and Structural Reliability, Albuquerque, NM, USA, July 2004.

 

Bhattacharya, B. Basu, R. and Srinivasan, S. “A probabilistic estimate of extreme value loads on transverse water tight bulkheads”, Proceedings of the 23rd International Conference on Offshore Mechanics and Arctic Engineeering , June, 2004, Vancouver, Canada

 

Stark, R. M., Shukla, D. K. and Bhattacharya, B. “On random vector analysis in mechanics problems”, 17th ASCE Engineering Mechanics Conference, Newark, DE, June 2004

 

Li, D., Bhattacharya, B. and Chajes, M. J. “In-service load & resistance factor rating method for bridges,” 17th ASCE Engineering Mechanics Conference, Newark, DE, June 2004

 

Chajes, M. , Bhattacharya, B., Attoh-Okine, N. and Hasting, J. “Application of Load and Resistance Factor Rating Using Site Specific Data”, First International Conference on Bridge Maintenance, Safety and Management, Barcelona, Spain, July 2002.

 

Basu, R. I. and Bhattacharya, B. “Challenges in the Application of System Reliability Principles to Floating Structures”, 24th Meeting of the United States Japan Natural Resources Marine Facilities Panel, Honolulu, Hawaii, November 2001

 

Bhattacharya, B. “Reliability of Nuclear Power Plant Components under Creep and Corrosion Damages”, International Conference on Civil Engineering, Bangalore, India, July 2001.

 

Pires, J.A., Sues, R.H., Cesare, M.A., Bhattacharya, B., Basu, R.I. and Sensharma, P. "Reliability Assessment of Watertight Ship Decks and Bulkheads", 8th ASCE Specialty Conference on Probabilistic Mechanics and Structural Reliability, Notre Dame, Indiana, July 2000

 

Bhattacharya, B., Wang, S., Basu, R. and Ma, K.-t. "Reliability-based combination of environmental parameters for the design of novel floating structures", 18th International Offshore Mechanics and Arctic Engineering Conference, New Foundland, Canada, July 1999.

 

Ellingwood, B. R. and Bhattacharya, B. "Damage mechanics-based assessment of time-dependent structural deterioration and reliability", 26th Water Reactor Safety Information Meeting, Washington, DC, October 1998.

 

Ellingwood, B. R. and Bhattacharya, B. "Reliability-based condition assessment and service life prediction of steel containment and liners", International Conference on Structural Mechanics in Reactor Technology, Lyon, France, Aug ., 1997.

 

 

 

 

 

 

 

 

 

 

 

Back to Bhattacharya Homepage

Description: Description: Description: Description: myspace visitor tracker