Research Publications

 

Google Scholar Citation Indices
(as on May  22, 2018)		 Research Gate Score
(as on May 22, 2018)
Citations 2433 RG Score 35.71
h-index 25
i10-index 69
Patent Filed: 05
1. Counter  Rotating Twin Tool with Variable Gap Setup for Friction Stir Welding (Filed Ref No: 1297/KOL/2014, Date: 15/Dec/2014 )
2. A Counter Rotating Pin and Shoulder Tool Arrangement for Friction Stir Weld System (Filed Ref No: 201631016398, Date: 11/May/2016)
3. Add-on Kit for Doing Cost Effective, Energy Efficient, Rapid, Solid-State Friction Sintering on Vertical Milling/Drilling/Friction Stir Welding Machines (Filed Ref No: 201731037839, Date: 25/Oct/2017).
4. Real time surface defect analysis and correction in friction stir welding process by image processing (Approved by the Institute, and Submitted for filing on May 22, 2018)
5. Cloud based Remote Manufacturing with Machine Learning based Real Time Control (Approved by the Institute, and Submitted for filing on May 22, 2018)
Research Publications : 213

International Book Chapter

International Journal

National Journal

International Conference

 National Conference

Total
09 124 03 59 18 213

INTERNATIONAL BOOK CHAPTERS: 

1

 Priyadarshini, Amrita, Pal, Surjya K., Samantaray, Arun K., “Finite Element Modeling of Chip Formation in Orthogonal Machining”, in Statistical and Computational Techniques in Manufacturing, Springer, pp. 101-144, 2012.

2

 Dutta, Samik, Pal Surjya K. and Sen, Ranjan, “Digital Image Processing in Machining”, Modern Mechanical Engineering, Springer, pp. 367-410. 2014.

3

 Sardar, Suprim, Mandal,  Atanu, Pal, Surjya K. and Singh, Shiv Brat, “Solid-State Joining by Roll Bonding  and Accumulative Roll Bonding”, in Advances in Material Forming and Joining, Springer, PP. 351-377, 2015.

4

 Rout, Matruprasad, Pal, Surjya K., Singh, Shiv B., “Cross Rolling: A Metal Forming Process”, in Modern Manufacturing Engineering: Research, development and education, Springer, pp. 41-64, 2015.

5

 Jain, Rahul, Kumari, Kanchan, Kesharwani, Ramkumar, Kumar, Sachin, Pal, Surjya K., Singh, Shiv B., Panda, Sushanta K., Samantaray, Arun K., “Frictions Stir Welding: Scope and Recent Development”, in Modern Manufacturing Engineering: Research, development and education, Springer, pp. 179-229, 2015.

6

 Jain, Rahul, Pal, Surjya K., and Singh, Shiv B., “Numerical modeling methodologies for friction stir welding process”, in  Computational Methods and Production Engineering, Woodhead Publishing (Elsevier), pp. 125-168, 2017.

7

 Rout, Matruprasad, Pal, Surjya K., and Singh, Shiv B., “Finite element modeling of hot rolling: Steady- and unsteady-state analyses”, in Computational Methods and Production Engineering, Woodhead Publishing (Elsevier), pp. 83-124, 2017.

8

 Jain, Rahul, Pal, Surjya K., and Singh, Shiv B., “Thermomechanical Simulation of friction stir welding process using Lagrangian method”, in  Simulation for Design and Manufacturing, Springer, pp. 103-146, 2018.

9

 Joshi, H. S., Pal, Surjya K., and Chakraborty, Goutam, “Study on the Delamination of GFRP Composites in Drilling: A Finite Element Model”, in  Simulation for Design and Manufacturing, Springer, pp. 1-43, 2018.

INTERNATIONAL JOURNAL PUBLICATIONS:

1

 Pal, Surjya K., Mukherjee, Amalendu., and Karmakar, Ranjit., “Modelling of  Thermometallurgical Process in a Runout Table – A Bond Graph Approach”, International Journal of Modelling and Simulation, ACTA Press (USA),  Vol. 22, No. 1, 2002, pp. 39-46.

2

 Pal, Surjya K., Mukherjee, Amalendu., and Karmakar, Ranjit., “Modelling of Thermometallurgical Process in a Runout Table – Simulation   Studies of Eutectoid and 1025 Carbon Steel”, International  Journal of Modelling and Simulation, ACTA Press (USA), Vol. 22, No. 2, 2002, pp. 77-85.

3

 Pal, Surjya  K., and Linkens, Derek A., “Temperature Distrbution in Steel During Hot Rolling : Pseudo-Bond Graph View”, Simulation Modelling Practice and Theory, Elsevier Science Publications, Vol. 10, 2002, pp. 69-85.

4

 Bisht, Himanshu, Gupta, Jatin, Pal, Surjya K., and Chakraborty, Debabrata,  “Artificial Neural Network Based Prediction of Flank Wear in Turning”,International Journal of Materials and Product Technology, Inderscience Publishers (UK), Vol. 22, No.4, 2005, pp. 328-338.

5

 Pal, Surjya K., and Linkens, Derek A., “Bond Graph Modelling and Simulation of Static Recrystallization Kinetics in Multipass Hot Steel Rolling”, Computer, Materials and Continua, Tech Science Press (USA), Vol. 2, No. 2, 2005, pp. 113-118.

6

 Pal, Surjya K., and Chakraborty, Debabrata, “Surface Roughness Prediction in Turning Using Artificial Neural Network”, Neural Computing and Applications, Springer-Verlag (London), Vol. 14, No. 4, 2005, pp. 319-324.

7

 Panda, Sudhanshu, S., Singh, Anil K., Chakraborty, Debabrata, and Pal, Surjya K., “Drill Wear Monitoring using Back Propagation Neural Network”, Journal of Materials Processing Technology, Elsevier Science Publications, 172, 2006, pp. 283-290.

8

 Singh, Anil K., Panda, Sudhansu S., Pal, Surjya K., and Chakraborty, Debabrata, “Predicting Drill Wear using Artificial Neural Network”, International Journal of Advanced Manufacturing Technology, Springer-Verlag (London), 28, 2006, pp. 456-462.

9

 Mandal, Debabrata, Pal, Surjya K., and Saha, P., “Modeling of Electrical Discharge Machining Process using Back Propagation Neural Network and Multi-objective Optimization using Non-dominating Sorting Genetic Algorithm-II”, Journal of Materials Processing Technology, Elsevier Science Publications, Vol. 186, Issues 1-3, 2007, 154-162.

10

 Garg, S., Pal, S. K., and Chakraborty, D., “Evaluation of the Performance of Backpropagation and Radial Basis Function Neural Networks in Predicting the Drill Flank Wear”, Neural Computing and Applications, Springer-Verlag (London), Vol. 16, 2007, 407-417.

11

 Patra, K., Pal, S. K., and Bhattacharyya, K., “Artificial Neural Network Based Prediction of Drill Flank Wear From Motor Current Signals”, Applied Soft Computing Journal, Elsevier Science Publications, Vol. 7, 2007, 929-935.

12

 Pal, Surjya K., Talamantes-Silva, Jesus., Linkens, Derek A., Howard, Ian C., “Bond Graph and Finite Element Analysis of Temperature Distribution in Hot Rolling Processes : A Comparative Study”,Journal of Systems and Control Engineering (Proceedings of the I MECH E, Part I ), Professional Engineering Publishing Ltd, UK, Vol. 221, I4, 2007, 653-661.

13

 Mandal, Manishankar, and Pal, Surjya K., “Bond Graph Modelling of Temperature Distribution in a Steel Plate During Multi-stand Rolling”, International Journal of Materials and Product Technology,Inderscience Publishers (UK), 2007, Vol. 30, No. 4, pp. 370-385.

14

 Mandal, Debabrata, Pal, Surjya K., and Saha, P., “Back Propagation Neural Network Based Modeling of Multi-responses of an Electrical Discharge Machining Process”, International Journal of Knowledge-Based and Intelligent Engineering Systems, IOS Press (Netherlands), 2007, Vol. 11. No. 2, pp. 105-113.

15

 Patra, K., Pal, S. K., and Bhattacharyya, K., “Application of Wavelet Packet Analysis in Drill Wear Monitoring”, Machining Science and Technology,Taylor & Francis, 2007, Vol. 11, Issue 3, pp. 413-432.

16

 Pal, Sukhomay, Pal, Surjya K., and Samantaray, Arun K., “Radial basis function neural network model based prediction of weld-plate distortion due to pulsed metal inert gas welding”, Science and Technology of Welding and Joining, Maney Publishing (UK),Vol. 12, No. 8, 2007, pp. 725-731.

17

 Panda, S. S., Chakraborty, D., and Pal, S. K., “Flank Wear Prediction in Drilling using BackPropagation Neural Network and Radial Basis Function Network”, Applied Soft Computing Journal, Elsevier Science Publications,Vol. 8, No. 2, 2008, pp. 858-871.

18

 Mandal, Manishankar, and Pal, Surjya K., “Pseudo-bond Graph Modelling of Temperature Distribution in a Through-process Hot Steel Rolling”, Mathematics and Computers in Simulation,Elsevier Science Publications, Vol 77, No. 1, 2008, pp. 81-95.

19

 Panda, S., Chakraborty, D., and Pal, S. K., “Monitoring of Drill Flank Wear using Fuzzy Back Propagation Neural Network”, International Journal of Advanced Manufacturing Technology,Springer-Verlag (London), Vol. 34, No. 3-4, 2007, pp. 227-235.

20

 Garg. S., Patra, K., Pal, S. K., and Chakraborty, D., “Effect of Different Basis Functions on a Radial Basis Function Network in Prediction of Drill Flank Wear from Motor Current Signals”, Soft Computing –  A Fusion of Foundations, Methodologies and Applications, Springer-Verlag Publications, Vol. 12, No. 8, 2008, pp. 777-787.

21

 Pal, Sukhomay, Pal, Surjya K., and Samantaray, Arun K., “Sensor based weld bead geometry prediction in pulsed metal inert gas welding process through artificial neural networks”,International Journal of Knowledge-Based and Intelligent Engineering Systems, IOS Press (Netherlands), Vol. 12, No. 2, 2008, pp. 101-114.

22

 Pal, Sukhomay, Pal, Surjya K., and Samantaray, Arun K., “Artificial neural network modeling of weld joint strength prediction of a pulsed metal inert gas welding process using arc signals”, Journal of Materials Processing Technology, Elsevier Science Publications, 2008, Vol. 202, No. 1-3, pp. 464-474.

23

 Saha, Probir, Singha, Abhijit, Pal, Surjya K., and Saha, Partha, “Soft computing models based prediction of cutting speed and surface roughness in wire electro-discharge machining of tungsten carbide cobalt composite”, International Journal of Advanced Manufacturing Technology, Springer-Verlag (London), 2008, Vol. 39, No. 1-2, pp. 74-84.

24

 Pal, Sukhomay, Pal, Surjya K., and Samantaray, Arun K., “A neuro-wavelet packet analysis based on current signature for weld joint strength prediction in a pulsed metal inert gas welding process”, Science and Technology of Welding and Joining, Maney Publishing (UK), 2008, Vol. 13, No. 7, 2008, pp. 638-645.

25

 Panda, S. S., Chakraborty, D., and Pal, S. K., “Drill Wear Prediction using Different Neural Network Architectures”, International Journal of Knowledge-Based and Intelligent Engineering Systems, IOS Press (Netherlands), 2008, Vol. 12, No. 5-6, 327-338.

26

 Patra, K., Pal, S. K., and Bhattacharyya, K., “Application of wavelet packet transform based normalized radial basis function network in a machining process”, International Journal of Materials and Product Technology,Special issue on “Intelligent Machining – Computational Methods and Optimisation”, Inderscience Publishers (UK), 2009, Vol. 35, No. 1/2, pp. 184-198.

27

 Patra, K., Bhattacharyya, K., and Pal, S. K., “Neural network based prediction of drill wear from theoretically analyzed and experimentally measured values of thrust force and torque”,International Journal of Machining and Machinability of Materials, Inderscience Publishers (UK), 2009, Vol. 5, No.2/3  pp. 207 – 231.

28

 N. Raghavendra, Koranne, Rakshit, Pal, Sukhomay, Pal, Surjya K., and Samantaray, Arun K., “Joint strength prediction in a pulsed MIG welding process using hybrid optimized model”, International Journal of Advanced Manufacturing Technology, Springer-Verlag (London), 2009, Vol. 41, No. 7-8, pp. 694-705.

29

 Saha, Probir., Tarafdar, Debasish., Pal, Surjya K., Saha, Partha., Srivastava Ashok K., and Das, Karabi, “Modeling of wire-electro-discharge machining of TiC/Fe in-situ metal matrix composite using normalized RBFN with enhanced k-means clustering technique”, International Journal of Advanced Manufacturing Technology, 2009, Vol. 43, No. 1-2, pp.107-116.

30

 Pal, Sukhomay, Malviya, Santosh K., Pal, Surjya K., and Samantaray, Arun K. Samantaray, “Optimization of quality characteristics parameters in a pulsed metal inert gas welding process using grey-based Taguchi method”, International Journal of Advanced Manufacturing Technology, Springer, Vol. 44, pp. 1250-1260, 2009.

31

 Ghosh, Samir K., Pal, Sukhomay, Roy, Sujit K., Pal, Surjya K., and Basu, Debabrata, “Modelling of the flame temperature of solution combustion synthesis of nanocrystalline calcium hydroxyapatite material and its parametric optimization”, Bulletin of Materials Science, Springer, Vol. 33, No. 4, pp. 339-350, 2010.

32

 Pal, Kamal, Bhattacharya, Sandip, and Pal, Surjya K., “Prediction of metal deposition from arc sound and weld temperature signatures in pulsed MIG welding”, International Journal of Advanced Manufacturing Technology, Springer Verlag, Vol. 45 (11-12), pp. 1113-1130, 2009.

33

 Pal, Sukhomay, Pal, Surjya K., and Samantaray, A. K., “Determination of optimal pulse metal inert gas welding parameters with a Neuro-GA technique”, Materials andManufacturing Processes, Taylor & Francis, Vol. 25, pp. 606-615, 2010.

34

 Sukhomay Pal, PhilippusStephanusHeyns, Burkhard H Freyer, Nico J Theron, Surjya K Pal, “Tool wear monitoring and selection of optimum cutting conditions with progressive tool wear effect and input uncertainties”, Journal of Intelligent  Manufacturing, Springer Verlag, Vol. 22(4), pp. 491-504, 2011.

35

 N. Raghavendra, Koranne, Rakshit, Patra, Karali, and Pal, Surjya K., “A Neuro Ant Colony Optimized Model for Drill Flank Wear Prediction”, International Journal for Manufacturing Science and Production, Freund Publishing House, Israel , Vol. 10 (3-4), pp. 169-184, 2009.

36

  Pal, Kamal, and Pal, Surjya K., “Monitoring of weld penetration using arc acoustics”, Materials and Manufacturing Processes, Taylor & Francis, 26, 684-693, 2011.

37

 Pal, Kamal, Bhattacharya, Sandip, and Pal, Surjya K., “Multisensor based monitoring of weld deposition and plate distortion for various torch angles in pulsd MIG welding using arc acoustics”,International Journal of Advanced Manufacturing Technology, Springer Verlag, Vol. 50 (5-8), pp. 543-556, 2010.

38

 Pal, Sukhomay, Pal, Surjya K., and Samantaray, A. K., “Prediction of the quality of pulsed metal inert gas welding using statistical parameters of arc signals in artificial neural network”, International Journal of Computer Integrated Manufacturing,Taylor & Francis, Vol. 23, pp. 453-465, 2010.

39

 Pal, Kamal, and Pal, Surjya K., “Sensor based characterization of weld quality and process stability monitoring in pulsed MIG welding”, International Journal of Mechatronics and Intelligent Manufacturing, Nova Science Publishers, USA. (Special Issue), Vol. 2 (1-2), pp. 5-16, 2010.

40

 Priyadarshini, Amrita, Pal, Surjya K., Samantaray, Arun K., “Finite element study of serrated chip formation and temperature distribution in orthogonal machining”, International Journal of Mechatronics and Intelligent Manufacturing, Nova Science Publishers, USA., . (Special Issue),Vol. 2 (1-2), pp. 53-72, 2010.

41

 Garg. S.,Patra, K., Khetrapal, V., Pal, S. K., and Chakraborty, D., “Genetically Evolved Radial Basis Function Network Based Prediction of Drill Flank Wear”, Engineering Applications of Artificial Intelligence,  Elsevier Publications, Vol. 23, pp. 1112-1120, 2010.

42

 Pal, Kamal, and Pal, Surjya K., “Soft Computing Methods Used for the Modeling and Optimization of Gas Metal Arc Welding: A Review”, International Journal of Manufacturing Research, Inderscience Publications, Vol. 6(1), pp. 15-29, 2011.

43

 Pal, Kamal, Bhattacharya, Sandip, and Pal, Surjya K., “Investigation on arc sound and metal transfer modes for on-line monitoring in pulsed gas metal arc welding”, Journal of Materials Processing Technology, Elsevier Publications, Vol. 210 (10), pp. 1397-1410, 2010.

44

 Patra, K., Pal, Surjya K., and Bhattacharyya, K., “Fuzzy radial basis function (FRBF) network based tool condition monitoring using vibration signals”, Machining Science and Technology, Taylor & Francis, Vol. 14, No. 2, pp. 280-300, 2010.

45

 Pal, Kamal, and Pal, Surjya K., “Effect of pulse parameters on weld quality in pulsed gas metal arc welding: a review”, Journal of Materials Engineering and Performance, Springer Verlag, 20(6), 918-931, 2011.

46

 Pal, Kamal, and Pal, Surjya K., “Study of weld joint strength using sensor signals for various torch angles in pulsed MIG welding”, CIRP Journal of Manufacturing Science and Technology, Elsevier Publications, 3(1), 55-65, 2010.

47

 Pal, Kamal, Bhattacharya, Sandip, and Pal, Surjya K., “Optimization of weld deposition in pulsed MIG welding using hybrid neuro based techniques.” International Journal of Computer Integrated Manufacturing, Taylor & Francis, Vol. 24(3), pp. 198-210, 2011.

48

 Priyadarshini, Amrita, Pal, Surjya K., Samantaray, Arun K., “A Finite Element Study of Chip Formation Process in Orthogonal Machining”, International Journal of Manufacturing, Materials and Mechanical Engineering, USA, Vol. 1(4), pp. 19-45, DOI:10.4018/ijmmme.2011100102, 2011

49

 Priyadarshini, Amrita, Pal, Surjya K., Samantaray, Arun K., “Influence of the Johnson Cook Material Model Parameters and Friction Models on Simulation of Orthogonal Cutting”, International Journal of Machining and Forming Technologies, Nova Science, USA, Vol. 4 (1-2), pp. 59-83, 2011.

50

 Mahapatra, Soumya S., Chakraborty, Sudipto, and Pal, Surjya K., “Experimental studies on different cooling processes to achieve ultra fast cooling rate for hot steel plate”, Experimental Heat Transfer,Taylor Francis,Vol 25 (2), pp. 111-126, 2012.

51

 Das Chakladar, N., Pal, Surjya K., Mandal, Partha, “Drilling of woven glass fiber reinforced plastic – an experimental and finite element study”, International Journal of Advanced Manufacturing Technology, Springer Verlag, Vol. 58(1-4), pp. 267-278, 2012.

52

 Bhattacharya, Sandip, Pal, Kamal, and Pal, Surjya K., “Multi-Sensor based prediction of metal deposition in pulsed gas metal arc welding using various soft computing models”, Applied Soft Computing, Elsevier Publications, Vol. 12(1), pp. 498-505, 2012.

53

 Chatterjee, Sudhanya, Chatterjee, Riju, Pal, Srikanta, Pal, Kamal, and Pal, Surjya K., “Adaptive chirplet transform for sensitive and accurate monitoring of pulsed gas metal arc welding process”,International Journal of Advanced Manufacturing Technology, Springer Verlag, Vol. 60(1-4), pp. 111-125, 2012.

54

 Datta, Anurup, SamikDutta, Mukherjee, S., Sen, R., and Pal, Surjya K., “Texture Analysis of Turned Surface Images using Grey Level Co-occurrence Technique”, Advance Materials Research,  Vol 365, 2012, pp 38-43.

55

 Dutta, S., Datta, A., DasChakladar, N., Pal, Surjya K., Mukhopadhyay, S., and Sen, R., “Detection of Tool Condition from the Turned Surface Images using an Accurate Grey Level Co-occurrence Technique”, Precision Engineering, Elsevier Publications, Vol. 36(3), pp. 458-466, 2012.

56

 Mohapatra, Soumya S., Ravikumar, Satya V., Verma, Ankur,  Pal, Surjya K., and Chakraborty, Sudipto,  “Experimental Investigation of Effect of a Surfactant to Increase Cooling of Hot Steel Plates by a Water Jet”, Journal of Heat Transfer, ASME Publications, 135 (3), 032101-7, 2013.

57

 Mohapatra, Soumya S., Ravikumar, Satya V., Andhare Sachin K.,  Chakraborty, Sudipto, and Pal, Surjya K., “Experimental study and optimization of air atomized spray with surfactant added water to produce high cooling rate”, Journal of Enhanced Heat Transfer, Begell House Publications, 19, 397-408, 2012.

58

 Mohapatra, Soumya S., Srinath, K., Pal, Surjya K., and Chakraborty, S.,“ Enhancement of Cooling Rate for a Hot Steel Plate using Air-Atomized Spray with Surfactant-Added Water,” Experimental Heat Transfer, Taylor Francis Publication, 27(1), 72-90, 2014.

59

 Mohapatra, Soumya S., Ravikuma, Satya V., Chakraborty, S., Pal, Surjya K., “Ultra Fast Cooling of a Hot Steel Plate by Using High Mass Flux Air Atomized Spray,” Steel Research International, Wiley Publication, Vol. 84, pp. 229-236, 2013.

60

 Saha, Probir, Tarafdar, Debasish, Pal, Surjya K., Saha, Partha, Srivastava Ashok K., and Das, Karabi, “Multiobjective Optimization in wire electro discharge machining of TiC reinforced composite neuro genetic technique”, Applied Soft Computing, Elsevier Science, Vol. 13, pp. 2065-2074, 2013.

61

 Dutta, S., Pal, S K., Mukhopadhyay, S., and Sen, R., “Application of Digital Image Processing in Tool Condition Monitoring: A Review”, CIRP Journal of Manufacturing Science and Technology (Elsevier),Vol. 6, pp. 212-232, 2013.

62

 Datta, A., Dutta, S., Pal, S. K., and Sen, R., “Progressive Cutting Tool Wear Detection from Machined Surface Images using Voronoi Tessellation Method”, Journal of Materials Processing Technology, Elsevier, 213 (12),  2339-2349, 2013.

63

 Dutta, S., Kanwat, A., Pal, S. K., and Sen, R., “Correlation Study of Tool Wear with machined Surface Texture in end Milling”, Measurement (Elsevier), Vol. 46 (10), pp. 4249-4260, 2013.

64

 Mohapatra, Soumya S., Ravikumar, Satya V., Ranjan, Ravi, Pal, Surjya K., Singh Shiv B.,  and Chakraborty, S., “Ultra Fast Cooling and its Effect on the Mechanical Properties of  Steel,” Journal of Heat Transfer, ASME Publications, 136, 032101-9, 2013.

65

 Mohapatra, Soumya S., Singh, A., Bhattacharya, C., Ravi Kumar, S. V., Chakraborty, Sudipto, and Pal, Surjya K., “Ultra fast cooling of a hot steel plate by air atomized spray with salt solution” , Heat and Mass Transfer,  Springer Publication, 2014, 50, 587–601

66

 Mohapatra, Soumya S., Singh, A., Bhattacharya, C., Ravi Kumar, S. V., Chakraborty, Sudipto, and Pal, Surjya K., “Effect of Oxide Layer in the Ultra Fast Cooling of a Steel Plate” Experimental Heat Transfer, Taylor Francis Publication, 28, 156–173, 2015

67

 Ravi  Kumar, Satya V., Jha Jay M, Mohapatra, Soumya S., Sinha, A., Pal, Surjya K., and Chakraborty,  Sudipto., “Experimental Study of the Effect of Spray Inclination on Ultrafast Cooling of a Hot Steel Plate”, Heat and Mass Transfer, Springer Publication, 49, 1509-1522, 2013.

68

 Ravi  Kumar, Satya V., Jha Jay M., Mohapatra, Soumya  S., Pal,  Surjya  K., and   Chakraborty,  Sudipto., “Influence of Ultrafast Cooling on Microstructure and Mechanical Properties of Steel”, Steel Research International, Wiley Publication, 84 (11), 1157-1170, 2013.

69

 Ravi  Kumar, Satya V., Jha Jay M., Sarkar, I., Mohapatra ,  Soumya  S., Pal,  Surjya  K., and   Chakraborty,  Sudipto., “Achievement of Ultrafast Cooling Rate in a Hot Steel Plate by Air-atomized Spray with Different Surfactant Additives”,  Experimental Thermal and Fluid Science, Elsevier, Vol. 50, pp. 79-89, 2013.

70

 Patra, K., Pal, Surjya K., and Bhattacharyya, K., “Strategies for Intelligent Drill Wear Prediction using Multiple Sensor Signals”, International Journal of Mechatronics and Manufacturing Systems, Inderscience Publishers (UK), 6 (5/6), 493-512, 2013.

71

 Ravi  Kumar, Satya V., Jha Jay M., Sarkar, I., Pal,  Surjya  K., and Chakraborty,  Sudipto., “ Ultrafast cooling of medium carbon steel strip by air atomized water sprays with dissolved additives”, Ironmaking & Steelmaking, Taylor Francis Publication, 41 (7), 529-538, 2014.

72

 Ravi  Kumar, Satya V., Jha Jay M., Sarkar, I., Pal,  Surjya  K., and Chakraborty,  Sudipto., “Enhancement of heat transfer rate in air-atomized spray cooling of a hot steel plate by using an aqueous solution of non-ionic surfactant and ethanol”, Applied Thermal Engineering, Elsevier,  64 (1–2), 64-75, 2014.

73

 Garg. S., Patra, K., Pal, S. K., “Particle Swarm Optimization of a Neural Network Model in a Machining Process”, Sadhana, Springer, 39 (3), 2014, 533–548.

74

 Ravi Kumar, Satya V., Jha Jay M., Tiara, A M., Pal, Surjya K., and Chakraborty, Sudipto., “ Experimental investigation of air-atomized spray with aqueous polymer additive for high heat flux applications”, International Journal of Heat and Mass Transfer, Elsevier, Volume 72, May 2014, Pages 362–377.

75

 Ravi  Kumar, Satya V., Jha Jay M., Mohapatra, Soumya S., Pal,  Surjya  K., and   Chakraborty,  Sudipto., “Experimental Investigation of Effect of Different types of Surfactants and Jet height on Cooling of a Hot Steel Plate”, Journal of Heat Transfer, Transactions of ASME Publications,  136(7), 072102, 2014.

76

 Kumari, K., Pal, S. K., and Singh, S. B., “Friction Stir Welding by using Counter-rotating Twin Tool”, Journal of Material Processing Technology, Elsevier Publications, 215, 132–141, 2015.

77

 Kesharwani, R. K., Panda, S. K., and Pal, S. K., “Experimental Investigations on Formability of Aluminium Tailor Friction Stir Welded Blanks in Deep Drawing Process”, Journal of Materials Engineering and Performance, Springer, 2015,  24, 1038–1049

78

 Kesharwani, R. K., Panda, S. K., and Pal, S. K., “Multi Objective Optimization of Friction Stir Welding Parameters for Joining of Two Dissimilar Thin Aluminium Sheets”, Procedia Materials Science, Elsevier, 6, 178–187, 2014.

79

 Ravi  Kumar, Satya V., Jha Jay M., Sarkar, I., Pal,  Surjya  K., and   Chakraborty,  Sudipto., “Mixed-surfactant additives for enhancement of air-atomized spray cooling of a hot steel plate”,  Experimental Thermal and Fluid Science, Elsevier, 55 (2014) 210-220.

80

 Jha, J. M., Ravi Kumar, S. V., Haldar, K., Sarkar, I., Pal, S. K., and  Chakraborty, S., “Heat transfer from a hot moving steel plate by air-atomized spray impingement”, Experimental Heat Transfer, Taylor Francis Publication, 29(1), 78-96, 2016.

81

 Jha, J. M.,  Ravi Kumar, S. V., Tiara, A. M., Sarkar, I., Pal, S. K., and Chakraborty, S., “Ultrafast cooling of a hot moving steel plate by using alumina nanofluid based air atomized spray impingement”, Applied Thermal Engineering, Elsevier, 75, 738-747, 2015.

82

 Chakraborty, S., Sarkar, I., Haldar, K., Pal, S. K., and Chakraborty, S., Synthesis of Cu-Al Layered Double Hydroxide nanofluid and characterization of its thermal properties, Applied Clay Science, Elsevier, 107, 98-108, 2015

83

 Ravikumar, S V, Jha, J. M, Haldar K, Pal, Surjya K, Chakraborty S, “Surfactant based Cu-water nanofluid spray for heat transfer enhancement of high temperature steel surface” Journal of Heat Transfer, ASME, 137(5), 051504-051504-8, 2015

84

 Kumar, Ujjwal, Yadav Inderjeet, Kumari, Shilpi, Kumari, Kanchan, Kumar, Nitin, Kesharwani, Ramkumar, Jain, Rahul, Kumar, Sachin, Pal, Srikanta, Chakravarthy, Debashish, and Pal, Surjya K., “Defect identification in friction stir welding using discrete wavelet analysis”, Advances in Engineering Software, Elsevier Publication, 85, 43-50, 2015.

85

 Jha, J M, Ravikumar, S V, Sarkar I, Pal, Surjya K, Chakraborty, S, “Ultrafast cooling processes with surfactant additives for hot moving steel plate”, Experimental Thermal and Fluid Science, Elsevier, 68, 135-144, 2015.

86

 Jha, J M, Ravikumar, S V, Sarkar I, Pal, Surjya K, Chakraborty, S.,  “Jet impingement cooling of a hot moving steel plate: An experimental study”, Experimental Heat Transfer, Taylor Francis Publication, 29, 615–631, 2016

87

 Ravikumar, S V, Haldar, K, Chakraborty S, Jha, J. M, Pal, Surjya K, Chakraborty S, “Heat transfer enhancement using air-atomized spray cooling with water-Al2O3 nanofluid”, International Journal of Thermal Sciences, Elsevier, 96, 85-93,  2015.

88

 Bhat, Nagaraj N., Dutta, Samik, Vashists, Tarun, Pal, Srikanta, Pal, Surjya K., Sen, Ranjan , “Tool Condition Monitoring by SVM Classification of Machined Surface Images in Turning”, International Journal of Advanced Manufacturing Technology, Springer Verlag,  83(9-12), 1487-1502, 2016.

89

 Dutta, S.,  Pal, Surjya K., and Sen, R., “On-Machine Tool Prediction of Flank Wear from Machined Surface Images using Texture Analyses and Support Vector Regression”, Precision Engineering, Elsevier Publications, 43, 34-42, 2016.

90

 Bhat, Nagaraj N., Kumari, Kanchan, Dutta, Samik, Pal, Surjya K., Pal, Srikanta, “Friction Stir Weld Classification by Applying Wavelet Analysis and Support Vector Machine on Weld Surface Images”, Journal of Manufacturing Processes, Elsevier, 20(1), 274-281, 2015.

91

 Ishita Sarkar, Dinesh Kumar Behera, Jay M. Jha, S. K. Pal, S. Chakraborty, “Effect of polymer additive on the cooling rate of a hot steel plate by using water jet”, Experimental Thermal and Fluid Science, Elsevier, 70, 105-114, 2016.

92

 Dutta, S.,  Pal, Surjya K., and Sen, R., “Tool Condition Monitoring in Turning by Applying Machine Vision”, Transactions of ASME, Journal of Manufacturing Science and Engineering, 138(5), 051008-1-17, 2015.

93

 Pal, K., and Pal Surjya K., “Sensor based prediction of weld microstructure in pulsed MIG welding”, International Journal of Microstructure and Materials Properties, Inderscience Publishers, UK, 10(5-6), 402–434, 2015.

94

 Dutta, S.,  Pal, Surjya K., and Sen, R., “Progressive Tool Flank Wear Monitoring by Applying Discrete Wavelet Transform on Turned Surface Images”, Measurement, Elsevier Publications, 77, 388-401, 2016.

95

 Mahto, Raju P., Bhoje, R., Pal, Surjya K., Joshi, Harshadeep Shyamkant,and Das, S., “A study on mechanical properties in friction stir lap welding of AA 6061-T6 and AISI 304”, Material Science and Engineering  A, Elsevier Publications, 652, 136-144, 2016.

96

 Dutta, S.,  Pal, Surjya K., and Sen, R., “Progressive Tool Condition Monitoring of End Milling from Machined Surface Images”, Proceedings of IMechE, Journal of Engg Manufacture, SAGE Publications. Accepted on February 29, 2016

97

 Ranjan, R., Khan, Aaquib R., Parikh, C., Jain, R., Mahto, R., Pal, Surjya K., Pal, S., and Chakravarthy, D.,  “Classification and Identification of Surface Defects  in Friction Stir Welding : an Image Processing Approach, Journal of Manufacturing Processes, Elsevier Publication, 22, 237-253, 2016.

98

 Jain, R., Pal, Surjya K., and Singh, S. B., “A study on the variation of forces and temperature in a friction stir welding process: a finite element approach”, Journal of Manufacturing Processes, Elsevier Publication, 23, pp. 278-286, 2016

99

 Rout, Matruprasad, Pal, Surjya K., and Singh, S. B., “Finite Element Simulation of a Cross Rolling Process”, Journal of Manufacturing Processes, Elsevier Publication, 24 (1),  283- 292, 2016.

100

 Sahu, Prakash, Pal, Sukhomay, Pal, Surjya K., and Jain, Rahul, “Influence of plate position, tool offset and tool rotational speed on mechanical properties and microstructure of dissimilar Al/Cu friction stir welding joints”, Journal of Material Processing and Technology, Elsevier Publications, 235, 55-67, 2016.

101

 Bhat, Nagaraj N.,  Dutta, Samik, Pal, Surjya K., Pal, Srikanta, “Tool Condition Classification in Turning Process using Hidden Markov Model based on Texture Analysis of Machined Surface Images”, Measurement, Elsevier Publications, 90, pp. 500-509, 2016.

102

 Kumari Shilpi, Jain Rahul, Kuar Ujjwal, Yadav Inderjeet, Kumar Nitin, Kumari Kanchan, Kesharwani Ram Kumar, Kumar Sachin, Pal Srikanta, Pal, Surjya K., and Chakravarty Debashish, “Defect identification in friction stir welding using continuous wavelet transform”, Journal of Intelligent Manufacturing,  Springer, 2016, DOI 10.1007/s10845-016- 1259-1.

103

 Sahu Prakash, Kumari Kanchan, Pal Sukhomay, and Pal Surjya K., “Hybrid fuzzy-grey-Taguchi based multi weld quality optimization of Al/Cu dissimilar friction stir welded joints”, Advances in Manufacturing, Springer, 4 (3), 237-247, 2016.

104

 Samarshi Chakraborty, Ishita Sarkar, Dinesh Kumar Behera, Surjya K. Pal, Sudipto Chakraborty, “Experimental investigation on the effect of dispersant addition on thermal and rheological characteristics of TiO2 nanofluid”, Powder Technology, Elsevier, 307, 10-24, 2017.

105

 Tiara, A. M., Samarshi Chakraborty, Ishita Sarkar, Surjya K. Pal, and Sudipto Chakraborty, “Heat transfer in jet impingement on a hot steel surface using surfactant based Cu–Al layered double hydroxide nanofluid”,  International Journal of Heat and Mass Transfer, Elsevier, 101, 825-833, 2016.

106

 Tiara, A. M., Samarshi Chakraborty, Ishita Sarkar, Surjya K. Pal, and Sudipto Chakraborty, “Effect of alumina nanofluid jet on the enhancement of heat transfer from a steel plate”, Heat and Mass Transfer, Springer, 53 (6), 2187-2197, 2017.

107

 Sarkar, Ishita, Chakraborty, Samarshi, Jha, J.M., Pal, Surjya K., and Chakraborty, Sudipto, “Ultrafast cooling of a hot steel plate using Cu-Al layered double hydroxide nanofluid jet”, International Journal of Thermal Sciences, Elsevier, 116, 52-62, 2017.

108

 Jain, R., Pal, Surjya K., and Singh, S. B., “Finite element simulation of pin shape influence on material flow and forces in friction stir welding”, International Journal of Advanced Manufacturing Technology, Springer, 94 (5-8), 1781-1797, 2018

109

 Jha, J M, Sarkar I, Pal, Surjya K, Chakraborty, S.,  “Heat transfer from a hot moving steel plate by using Cu-Al layered double hydroxide nanofluid based air atomized spray”, Experimental Heat Transfer, Taylor Francis Publication, 30 (6), 500-516, 2017.

110

 Tiara, A. M., Samarshi Chakraborty, Ishita Sarkar, Surjya K. Pal, and Sudipto Chakraborty, “Synthesis and characterization of Zn-Al layered double hydroxide nanofluid and its application as a coolant in metal quenching”, Applied Clay Science, Elsevier, 143, 241-249, 2017.

111

 Kesharwani, R. K., Basak, S.,  Panda, S. K., and Pal, S. K., “Improvement in Limiting Drawing Ratio of Aluminum Tailored Friction Stir Welded Blanks using Modified Conical Tractrix Die”, Journal of Manufacturing Processes, Elsevier, 28 (1), 137-155, 2017.

112

 Parikh, C.,  Ranjan, R., Khan, Aaquib R., Jain, R., Mahto, R., Chakravarthy, D., Pal, S., and Pal, Surjya K., “Volumetric defect analysis in friction stir welding based on three dimensional reconstructed images”, Journal of Manufacturing Processes, Elsevier Publication, 29, 96-112, 2017.

113

 Tiara, A. M., Samarshi Chakraborty, Ishita Sarkar, A. Avinash, Surjya K. Pal, and Sudipto Chakraborty, “Heat transfer enhancement using surfactant based alumina nanofluid jet from a hot steel plate”, Experimental Thermal and Fluid Science, Elsevier, 89, 295-303, 2017.

114

 Abhishek Sharma, Vyas Mani Sharma, Sanchit Mewar, Surjya Kanta Pal & Jinu Paul, “Friction stir processing of Al6061-SiC-graphite hybrid surface composites”, Materials and Manufacturing Processes, Taylor & Francis, 33 (7), 795-804, 2017.

115

 Rout, Matruprasad, Ranjan, R., Pal, Surjya K., and Singh, S. B., “EBSD study of microstructure evolution during axisymmetric hot compression of 304LN stainless steel:, Materials Science & Engineering A, 2017, 711, 378-388, 2018.

116

 Jain, R., Kumari, K., Pal, Surjya K., and Singh, S. B., “Counter rotating twin-tool system in friction stir welding process: a simulation study”, Journal of Materials Processing Technology,  Elsevier Publication, 255, 121-128, 2018.

117

 Rout, Matruprasad, Pal, Surjya K., and Singh, S. B., “Prediction of edge profile of plate during hot cross rolling”, Journal of Manufacturing Processes, Elsevier Publication, 31, 301-309, 2018.

118

 Rout, Matruprasad, Biswas, Somjeet, Ranjan, Ravi, Pal, Surjya K., and Singh, Shiv B., “Deformation behavior and evolution of microstructure and texture during hot compression of AISI 304LN stainless steel”, Metallurgical and Materials Transaction A, 49, 2018, 864-880

119

 Sahu, Santosh K., Mishra, Debasish, Mahto, Raju P., Sharma, Vyas M., Pal, Surjya K., Pal, Kamal, Banerjee, Susanta, and Dash, Padmanav; “Friction stir welding of polypropylene sheets”, Engineering Science and Technology, an International Journal, Elsevier Publications, 21, 245-255, 2018.

120

 I. Sarkar, S. Chakraborty, A. Ashok, I. Sengupta, S.K. Pal, S. Chakraborty, “Comparative study on different additives with a jet array on cooling of a hot steel surface”, Applied Thermal Engineering, Elsevier Publications,137, 154-163, 2018.

121

 Mahto, R.P., Kumar, R., Pal, Surjya K., and Panda, Susanta K., “A comprehensive study on force, temperature, mechanical properties and micro-structural characterizations in friction stir lap welding of dissimilar materials (AA6061-T6 & AISI304)”, Journal of Manufacturing Processes, Elsevier Publications, 31, 624–639, 2018.

122

 Abhishek Sharma, Vyas Mani Sharma, Sanchit Mewar, Surjya Kanta Pal & Jinu Paul, “Surface modification of Al6061 by graphene impregnation through a powder metallurgy assisted friction surfacing”, Surface  and Coatings Technology, Elsevier, 337, 12-23, 2018.

123

 Samarshi Chakraborty, Ishita Sarkar, Avinash Ashok, Iman Sengupta, Surjya K. Pal, Sudipto Chakraborty, “Synthesis of Cu-Al LDH nanofluid and its application in spray cooling heat transfer of a hot steel plate”, Powder Technology, Elsevier, https://doi.org/10.1016/j.powtec.2018.05.004, 2018

124

 Prashant Chauhan, Rahul Jain, Surjya K. Pal, and Shiv B. Singh, “Modeling of defects in friction stir welding using coupled Eulerian and Lagrangian method”, Journal of Manufacturing Processes, Elsevier Publication, Accepted on May 22, 2018.

NATIONAL JOURNALS:

1
Matruprasad Rout, Surjya K. Pal, Shiv B. Singh, “Finite element analysis of cross rolling on AISI 304 stainless steel: prediction of stress and strain fields”,  Journal of the Institution of Engineers (India): Series C, Springer, Accepted, 2016

2

 Rahul Jain, Surjya K.Pal, Shiv B. Singh, “Finite Element Simulation of Temperature and Strain Distribution during Friction Stir Welding of AA2024 Aluminum Alloy”, Journal of the Institution of Engineers (India): Series C, Springer, Accepted, 2016

3

 Kamal Pal, and Surjya K. Pal , “”, Modelling of Manufacturing Process, Journal of the Institution of Engineers (India): Series C, Springer, https://doi.org/10.1007/s40032-018-0466-2, 2018

INTERNATIONAL CONFERENCE PUBLICATIONS:

1

 Pal, Surjya K., Mukherjee, Amalendu., and Karmakar, Ranjit., “Effect of Surface motion on metal cooling and  Microstructural Evolution : A Bondgraphic View”, International Conference of Bond Graph Modelling (ICBGM),  Society for Computer Simulation, USA, Feb 1999, Vol. 31, No. 1,  pp. 202-207.

2

 Pal, Surjya  K., and Linkens, Derek  A., “Bond Graph Modelling of Thermal Phenomena in Hot Rolling”, International Conference of Bond Graph Modelling (ICBGM), Society for Computer Simulation,  Arizona, USA, Jan 2001, Vol. 33, No. 1, pp. 253-256.

3

 Pal, Surjya K., and Linkens, Derek A., “Effect of Roll Gap on Temperature Distribution in Slab During Steel Hot Rolling : A Bond Graph Approach”, IFAC Symposium on Automation in Mining, Mineral and Metal Processing, Tokyo, Japan, September 2001, pp. 59-62.

4

 Pal, Surjya K., and Linkens, Derek A., “Effect of Roll Speed on Temperature in Hot Metal Rolling : A  Bond Graph Approach”, European Simulation Symposium, Marseilles, France, October 2001 pp. 818-821.

5

 Pal, Surjya K., Mukherjee, Amalendu., and Karmakar, Ranjit., “A Novel Approach to Metallurgical Process Modelling”, International Conference on Advances in Materials and Materials Processing (ICAMMP), I.I.T., Kharagpur, India,  February, 2002,  pp. 591-598.

6

 Pal, Surjya K., Talamantes-Silva, Jesus., Linkens, Derek A., Howard, Ian C., “Bond Graph and Finite Element Analysis of Temperature Distribution in Hot Rolling Processes”, International Conference on Thermomechanical Processing : Mechanics, Microstructure, Control, Sheffield, U.K.,  June 2002.

7

 Pal, Surjya K., and Linkens, Derek A., “An Integrated Bond Graph Model for Multipass Rolling Processes”, IEEE International Conference on Systems, Man and Cybernatics, Tunisia, October 2002, p. 50.

8

 Patra, K., Pal, S. K., and Bhattacharyya, K., “Drill Wear Monitoring using Current Signature Wavelet Packet Transform and Artificial Neural Network”, IEEE International Conference on Industrial Technology, IIT Bombay, Dec. 2006, pp. 1344-1348.

9

 Garg, S., Chakraborty D., Deb, S., and Pal, S. K., “A Neuro-Memetic model for the prediction of drill flank wear”, International Conference on Advances in Manufacturing and Technology Management (ICAMTM), Mumbai, India, Jan. 2007, pp.  9-15.

10

 Ranjan, Rajeev, Abhishek Kumar, Patra, Karali, Pal, Surjya K., and Samantaray, Arun K., “Prediction of drill flank wear using a neuro-GA model” Proceedings of the Global Conference on Production and Industrial Engineering, CPIE-2007, NIT Jalandhar, 2007 [Accepted].

11

 Sarkar, Abhijit, Pal, Sukhomay, Pal, Surjya K., and Samantaray, Arun, K., “Prediction of Welding Joint Strength and Bead Geometry in Pulsed Gas Metal Arc Welding using Artificial neural network”Proceedings of the Global Conference on Production and Industrial Engineering, CPIE-2007, NIT Jalandhar, 2007.

12

 Saha, Probir, Singha, Abhijit, Pal, Surjya K., and Saha, Partha, “A Neural Network Approach for Modeling the Wire Electro Discharge Machining of Tungsten Carbide Cobalt Composite”,Proceedings of the Global Conference on Production and Industrial Engineering, CPIE-2007, NIT Jalandhar, p. 38, 2007.

13

 Pal, Sukhomay, Pal, Surjya K., and Samantaray, Arun, K., “Determination of Optimal Pulse Metal Inert Gas Welding Parameters Using Neuro-GA Technique”, Proceedings of the 4th International Conference of Theoretical, Applied Computational and Experimental Mechanics (ICTACEM), IIT Kharagpur, p. 301, Dec. 2007.

14

 Patra, K., Pal, S. K., and Bhattacharyya, K., “Artificial neural network based tool condition monitoring in drilling using vibration signal analysis”, Proceedings of the 4th International Conference of Theoretical, Applied Computational and Experimental Mechanics (ICTACEM), IIT Kharagpur, p. 476, Dec. 2007.

15

 Saha, Probir, Pal, Surjya K., and Saha, Partha, “Application of fully supervised radial basis function network for prediction of machining performance in wire-EDM”, International Conference of Precision, Meso, Micro and Nano Engineering (COPEN), pp. 81-86, Trivandrum, 2007.

16

 Pal, Kamal, and Pal, Surjya K., “Modeling and control of a gas metal arc welding process using soft computing tools and sensor signals: A review”, International Conference Emerging Research and Advances in Mechanical Engineering (ERA 2009), pp. 651-656, Chennai.

17

 Priyadarshini, Amrita, Pal, Surjya K., and Samantaray, Arun K., “Estimation of heat generation and cutting tool temperature in orthogonal machining: A review”, International Conference Emerging Research and Advances in Mechanical Engineering (ERA 2009), Chennai.

18

 Ravishankar, S. N., Pal, Surjya K., and Samantaray Arun K., Drilling of glass fibre reinforced plastics: A review”, International Conference Emerging Research and Advances in Mechanical Engineering (ERA 2009), Chennai.

19

 Priyadarshini, Amrita, Pal, Surjya K., and Samantaray, Arun K., “Finite Element Study of Serrated Chip Formation”, International Conference on Advances in Mechanical Engineering (ICMAE 2009), S.V. National Institute of Technology, Surat – 395 007, Gujarat, India, August 3-5, 2009.

20

 Pal, Kamal, and  Pal, Surjya K., “Characterization of weld quality and process stability in pulsed MIG welding using sensor signals”, International Conference on Advances in Mechanical Engineering (ICMAE 2009), S.V. National Institute of Technology, Surat – 395 007, Gujarat, India, pp. 1019-1023, August 3-5, 2009.

21

 Sannapureddy, Hariprasad, Priyadarshini, Amrita, Pal, and Surjya K., “Finite Element Modeling of Turning Operation: Study on the Effect of Cutting Velocity and Feed on Cutting and Thrust Force”, International Conference on Advances in Mechanical and Building Sciences in the 3rd Millennium (ICAMB 2009), V.I.T University, Vellore, Tamil Nadu, December 14-16, 2009.

22

 Ravi Shankar, S. N., Pal, Surjya K., and Samantaray Arun K., “Drilling of Glass Fibre Reinforced Plastic (GFRP) Composite: Experimental Investigation on Effects of Process Parameters”, International Conference on Advances in Mechanical Engineering (ICMAE 2009), S.V. National Institute of Technology, Surat – 395 007, Gujarat, India, Jan 4-6, 2010.

23

 Ghosh, Madhumala, Das, Debkumar, Mandal, Subhodip, Chakraborty, Chandan, Pal, Mallika, Maity, Ashok, Pal, Surjya K., and Ray, Ajoy K, “Statistical Pattern Analysis of White Blood Cell Nuclei Morphometry”, IEEE Students’ Technology Symposium, IIT Kharagpur, 2010.

24

 Patra, Karali, Pal, Surjya K. and Bhattacharyya, Kingshook, “Strategies for Intelligent Tool Wear Prediction in a Machining Process”, 23rd International congress on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2010), pp. 623-626, June 28 to July 2, 2010 Nara, Japan.

25

 Mohapatra, Soumya S.,  Palleti, V. Reddy, Chakraborty, Sudipto,  and Pal, Surjya K.,   “Experimental Study of Ultra Fast Cooling of a Hot Steel Plate by Air-Assisted Spray at High Mass Flux” International Conference on Advanced in Materials and Materials Processing (ICAMMP), Indian Institute of Technology Kharagpur, India, Dec. 9-11, P. 32, 2011.

26

 Datta, A., Dutta, S., Pal, Surjya K., Sen, R., and Mukhopadhyay, S., “Texture Analysis of Turned Surface Images using Grey Level Cooccurrence Technique”, International Conference of Future Materials Engineering and Industrial Applications (ICFMEIA), 4th – 5th August 2011, Bali, Indonesia.

27

 Chatterjee, Sudhanya, Chatterjee, Riju, Pal, Srikanta, Pal, Kamal, and Pal, Surjya K., “Accurate Detection of Weld Defects using Chirplet Transform”, 4th International Conference on Computer and Automation Engineering (ICCAE), 2012, Mumbai, India, January 14 – 15, 2012.

28

 Joshi H S, Pal S K, Chakraborty G, Mandal P S, 2012, ‘Estimation of Thrust Force Using Finite Element Analysis during Drilling of GFRP Composites’, International Conference on Global Technology Initiatives 2012, Mumbai, India, ISBN 978-93-5067-450-5.

29

 Pal, Kamal, and  Pal, Surjya K., “Multi-sensor based prediction of weld quality characteristics in pulsed GMAW using artificial neural network ”, 4th International AIMTDR, Jadavpur University, India, December 14 to 16, 2012.

30

 Saha, Probir., Pal, S.K., and Saha, P., 2011 “Parametric Optimization in WEDM of WC-Co Composite by Neuro-Genetic Technique”, Proc. of the International Conference on Mechanical Engineering, Imperial College, London, pp. 2204-2209.

31

 Kesharwani, R., Panda, S. K., and Pal, S. K., “Multi Objective Optimization of Friction Stir Welding Parameters for Joining of Two Dissimilar Thin Aluminum Sheets” 3rd International Conference on Material Processing and Characterization (ICMPC-2014), GRIET Hyderabad, March, 2014.

32

 Jain, Rahul, Pal, S. K., and Singh, S. B., “Finite Element Simulation of Temperature Distribution and Stress Variation in AISI 1040 Steel by Friction Stir Welding/Procession”, 5th International and 26th All India Manufacturing Technology, Design and Research Conference AIMTDR, IIT Guwahati, Dec., 2014 (Accepted).

33

 Sardar, S., Mandal, A., Pal, S. K., and Singh, S. B., “Accumulative Roll Bonding of AA6005 and AA1060 Metal Strip: Study on Microstructure, Mechanical Properties and Minimum Bonding Criteria”, 5th International and 26th All India Manufacturing Technology, Design and Research Conference AIMTDR, IIT Guwahati, 12-14 Dec., 2014.

34

 Kumari, K., Pal, S. K., “Study on the Novel Twin-Tool System in Friction Stir Welding Process”, 5th International and 26th All India Manufacturing Technology, Design and Research Conference AIMTDR, IIT Guwahati, 12-14  Dec., 2014.

35

 Rout, Matruprasad, Pal Surjya K., and Singh, Shiv B., “Numerical Simulation of Temperature Field of AISI 316L Stainless Steel during Cross Rolling”, Proceedings of the International Conference on Innovation in Design, Manufacturing and Concurrent Engineering, IDMC-2014, NIT Rourkela, p. 81, 2014.

36

 Rout, Matruprasad, Pal Surjya K., and Singh, Shiv B., “Finite Element Analysis of Cross Rolling on AISI 304 Stainless Steel: Prediction of Stress and Strain Fields”, Proceedings of the 5th International and 26th All India Manufacturing Technology, Design and Research Conference, AIMTDR-2014, IIT Guwahati, p. 487-1, 2014.

37

 Kumari Kanchan, Pal K Surjya, “Friction Stir Processing of Al alloy by using Twin Tool”, International Colloquim on Materials, Manufacturing, and Metrology, ICMMM-2014, IIT Madras, Chennai, 08-09 August 2014.

38

 Kumari Kanchan, Pal K Surjya, Singh S.B.,”Novel Concept of Twin-Tool in Friction Stir Welding: a Study on hardness of non-heat treated and heat treated commercial pure Al alloys”, International Conference on Friction Based Processes, ICFP 2014, IISc, Bangalore, 03-05 September 2014.

39

 Jain, Rahul, Pal, Surjya K., and Singh, S. B., “Finite Element Simulation of Effect of Process Parameters on Forces and Spindle Torque in Friction Stir Welding”, International Conference on Friction Based Processes, ICFP 2014, IISc, Bangalore, 03-05 September 2014.

40

 Rout, Matruprasad, Krishna, K. Sai, Pal, Surjya K. and Singh, Shiv B., Experimental study of plastic anisotropy in hot cross rolling, 2nd International Conference on Rolling & Finishing Technology of Steel, SAIL, RDCIS, Ranchi, India, Iron & Steel Review, Sep. 2015, Vol. 59 No. 4, pp. 155-158.

41

 Jain, Rahul, Pal, Surjya K. and Singh, Shiv B.; “Simulation of Material Flow in Friction Stir Welding”, Proceedings of the International Conference on Advances in Materials and Manufacturing, (ICAMM), Hyderabad, pp 51-56, 2016.

42

 Rout, Matruprasad, Pal, Surjya K., Singh, Shiv B. and Biswas, Somjeet; “Evolution of Microstructure and Texture in 304 Austenitic Stainless Steel by Two Different Modes of Hot Rolling”, Proceedings of the International Conference on Advances in Materials and Manufacturing, (ICAMM), Hyderabad, pp 411- 416, 2016.

43

 Jain, Rahul, Pal, Surjya K. and Singh, Shiv B.; “A Coupled Thermo-Mechanical Model to Predict Forces, Temperature and Material Flow in Friction Stir Welding”, Proceedings of the 6th International and 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR), CoE, Pune, pp 1892-1895, 2016.

44

 Rout, Matruprasad, Ranjan, Ravi, Pal, Surjya K. and Singh, Shiv B.; “Study on Static Recrystallisation Behaviour of 304LN Stainless Steel by Two-Stage Compression Test”, Proceedings of the 6th International and 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR), CoE, Pune, pp 1007- 1011, 2016.

45

 Kumari, Kanchan, Mahto, Raju P., Pal, Surjya K. and Singh, Shiv B.; “Comparative Study on Effect of Counter Rotating Twin Tool and Single Tool on Temperature Rise During Friction Stir Welding”, Proceedings of the 6th International and 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR), CoE, Pune, pp 679-682, 2016.

46

 Joshi, Harshadeep S., Pal, Surjya K. and Chakraborty, Goutam; “Study on the Delamination of GFRP Composites in Drilling-A Finite Element Model”, Proceedings of the 6th International and 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR), CoE, Pune, pp 1879-1883, 2016.

47

 Sahu, Santosh K., Mishra, Debasish, Mahto, Raju P., Pal, Surjya K. and Pal, Kamal; Friction Stir Welding of HDPE Sheets-A Study on the Effect of Rotational Speed”, Proceedings of the 6th International and 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR), CoE, Pune, pp 1065-1068, 2016.

48

 Sarkar, Ishita, Pal, Surjya K., and Chakraborty S; “Heat transfer enehancement from a hot steel plate using Triton X-100 Surfactant Additive in water jet”, AICHE Annual Meeting, 2016 at San Francisco, USA.
49 Chakraborty S, Pal, Surjya K., and Chakraborty S; “Spray cooling of hot steel plate using water based TiO2 nanofluid”, AICHE Annual Meeting, 2016 at San Francisco, USA.
50 Sarkar, Ishita, Pal, Surjya K., and Chakraborty S; “Synthesis of titanium dioxide nanofluid and application in jet impingement cooling in steel industries”, ACS 254th National Meeting and Exposition, Fall 2017 held at Washington DC, USA.
51 Sahu, Santosh K., Panda, M, Mahto, Raju P., Pal, Surjya K., Pal, Kamal and Das, P; “Experimental Investigation to Join Al 6063 Alloy to Polypropylene using Friction Stir Welding”, Proceedings of the 10th International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 10), pp 727-731, 2017.
52 Kumari K, Mishra, D, and Pal, Surjya K., “Effect of process parameters on the evolution of residual stress in friction stir welding with counter-rotating twin tool”, International Conference on Advanced Materials and Processing Technologies (AMPT-2017), VIT Chennai, 11th – 14th December, 2017.
53 Mypati, Omkar, Sadhu, Abhijit, Sahu, Suryakanta, Mishra, Debasish and Pal, Surjya K.; “Formation of Kamacite (Fe, Ni) to increase the mechanical strength of friction stir lap welding of aluminium to steel aided with coating”, 7th Asia Steel International Conference, Bhubaneswar, Odisha, 06-09 February 2018.
54 Sahu, Suryakanta, Mypati, Omkar, Pal, Surjya K. and Singh, Shiv Brat; “Effect of Tool geometry on Weld strength and Hardness in Friction Stir Lap Welding of Dissimilar Materials”, 7th Asia Steel International Conference, Bhubaneswar, Odisha, 06-09 February 2018.
55 Mahto, Raju P., Gaikwad, Juhi, Kumar, Ravi and Pal, Surjya K.; “Friction stir lap welding of AA6061-T6 and AISI304: Mechanical and metallurgical properties of stir zone”, 7th Asia Steel International Conference, Bhubaneswar, Odisha, 06-09 February 2018.
56 Rout, Matruprasad, Singh, Shiv B. and Pal, Surjya K.; “Study on Static Recrystallisation Behaviour of 304LN Stainless Steel by Two-Stage Compression Test”, 7th Asia Steel International Conference, Bhubaneswar, Odisha, 06-09 February 2018.”
57 Sengupta Iman, Talukdar, Monikangkana, Pal, Surjya K., and Chakraborty S; “Modified Synthesis and Reduction of Graphene Oxide by Thermal Treatment”, MRS Spring Meeting and Exhibit 2018, April 2-6, 2018, Phoenix, Arizona, USA.
58 Talukdar, Monikangkana, Sengupta Iman, Pal, Surjya K., and Chakraborty S; “Characterization of Thermophysical Properties of Graphene Oxide and Reduced Graphene Oxide Nanofluids”, MRS Spring Meeting and Exhibit 2018, April 2-6, 2018, Phoenix, Arizona, USA.
59 Mishra D, Roy, Rohan B., Dutta S, Pal Surjya K., and Chakravarty D, “Concept of Industry 4.0 in Friction Stir Welding”, Industry 4.0 Summit, Manchester, 28th February-1st March, 2018.

NATIONAL CONFERENCE PUBLICATIONS:

1

 Pal, Surjya K., and Muramalla, Bhanu S., “Finite Element Application in Metal Cutting”, in Lecture Notes on Application of Finite Element Method in Manufacturing (QIP-Short-Term Course), Indian Institute of Technology Guwahati, 2004, pp. 43-56.

2

 Mandal, Manishankar, and Pal, Surjya K., “Bond Graph Modelling of Temperature Distribution Within a Slab in Reheat Furnace”, Proceedings of the National Conference on Advance Manufacturing and Robotics, Durgapur, India, 2004, pp. 427-434.

3

 Patra, Karali, and Pal, Surjya K., “Soft Computing Techniques Applied to Tool Condition Monitoring in Drilling-A Review”, Proceedings of the 12th National Conference on Machines and Mechanisms, IIT Guwahati, 2005, pp. 189-194.

4

 Saha, Probir, Pal, Surjya K., and Saha, Partha, “A Survey of Soft Computing Methods used in Wire-EDM”,Proceedings of the 12th National Conference on Machines and Mechanisms, IIT Guwahati, 2005, pp. 243-248.

5

 Patra, Karali, Pal, Surjya K., and Bhattacharyya, Kingshook, “Application of a Soft Computing Technique in Drilling”, Proceedings of the National Conference on Soft Computing Techniques for Engineering Applications, NIT Rourkela, 2006, pp. 137-144.

6

 Pal, Sukhomay, Pal, Surjya K., and Samantaray, Arun K., “A Review on Gas Metal Arc Welding Process Modelling and Control Using Soft Computing”, Proceedings of the National Conference on Soft Computing Techniques for Engineering Applications, NIT Rourkela, 2006, pp. 145-152.

7

 Mandal, Debabrata, Pal, Surjya K., and Saha, Partha, “Modelling of Electric Discharge Machining Using Artificial Neural Network”, Proceedings of the National Conference on Soft Computing Techniques for Engineering Applications, NIT Rourkela, 2006, pp. 153-158.

8

 Panda, Sudhanshu S., Chakraborty, Debabrata, and Pal, Surjya K., “Prediction of Drill Flank Wear Using Radial Basis Function Neural Network”, Proceedings of the National Conference on Soft Computing Techniques for Engineering Applications, NIT Rourkela, 2006, pp. 94-102.

9

 Garg, S., Pal, S. K., Chakraborty D., “Effect of basis width on the performance of radial basis function network in prediction of drill wear”, Proceedings of the National Conference on Recent Trends in Information Systems and Management, Vidisha, M.P. Nov. 2006, pp. 194-202.

10

 Pal, Kamal, and  Pal, Surjya K., “Artificial neural network based prediction of metal deposition in pulsed MIG welding using sensor signals”, National Conference on Recent Advances in Manufacturing Technology and Management (RAMTM 2010), 19th -20th February, Jadavpur University, Kolkata, pp. 169-174, 2010.

11

 Das Chakladar, Nilanjan, Pal, Surjya K., and Mandal, Partha S., “Finite Element Estimation of Cutting Parameters in Drilling Glass Fiber Reinforced Plastic (GFRP) Plates”, National Conference on Recent Advances in Manufacturing Technology and Management (RAMTM 2010), 19th -20th February, 2010, Jadavpur University, Kolkata.

12

 Jain, Rahul, and Pal, Surjya K., “Effect of Process Parameters On Cutting Forces and Temperature in Turning AISI 4340 Using Finite Element Approach”, National Conference on Recent Advances in Manufacturing Technology and Management (RAMTM 2010), 19th -20th February, 2010, Jadavpur University, Kolkata.

13

 Saha Probir, Pal, Surjya K., and Saha, Partha, “Modeling and Multi-Objective Optimization in Wire Electro-Discharge Machining of in-situ TiC reinforced austenitic manganese steel matrix composite”, National Conference on Recent Advances in Manufacturing Technology and Management (RAMTM 2010), 19th -20th February, 2010,  Jadavpur University, Kolkata.

14

 14. Pal, Kamal, and  Pal, Surjya K., “Neural network based modeling of joint mechanical properties in pulsed MIG welding using statistical features of sensor signals”, National Conference on Advances in Simulation and Optimization Techniques in Mechanical Engineering, 19th  -20th  February, 2012, KIIT University, Orissa.

15

 Pal, Kamal, and  Pal, Surjya K., “Artificial neural network based monitoring of weld quality in pulsed metal inert gas welding using wavelet packets of current signal” National conference on recent trends in manufacturing science and technology (RTMST-2013), 18th – 19th April, 2013 at NITTTR, Kolkata.

16

 Pal, Surjya K., and Kumari, Kanchan, “”Friction Stir Welding : Application and Development”, 4th National Conference on Advances in Metrology (Ad-Met), CSIR-CMERI, Feb. 25-27, 2015, pp XIV-XV (Invited Paper)

17

 Iqbal, Md Perwej, Jain, Rahul, and Pal, Surjya K., “Finite element modeling of friction stir pipe welding”, National conference on Advanced Functional Materials Processing And Manufacturing, CMERI Durgapur, PP. 72-75, 2017, Excel India Publishers, New Delhi

18

 Pal, Surjya K.; “Industry 4.0 in Friction Stir Welding”, National Conference on Advanced Functional Materials Processing and Manufacturing (NCAMMM), CMERI Durgapur, 16th -17th February 2018.